Description
Wooden Corner Foot 165mm × 165mm × 38mm
The Wooden Corner Foot 165mm × 165mm × 38mm is a low-profile L-shaped furniture foot designed to sit neatly at the corner of sofas, chairs, cabinets and upholstered furniture.
Manufactured from European Beech hardwood, its corner-style shape provides a broad finished appearance while keeping the furniture relatively close to the floor.
Available in a choice of Black, Mahogany, Natural, Oak, Raw and Wenge finishes, it can be selected to complement existing furniture or used as part of a new furniture project.
For other corner-style wooden furniture feet, browse the L Shape Wooden Feet category.
Wooden Corner Foot Specification
- Overall size: 165mm × 165mm × 38mm
- Timber: European Beech hardwood
- Style: L-shaped corner foot
- Finish options: Black, Mahogany, Natural, Oak, Raw and Wenge
- Base: metal glide fitted
- Position: furniture corner
- Suitable for: sofas, chairs, cabinets and upholstered furniture
The 38mm height makes this a particularly useful option where a broad wooden furniture support is required without substantially increasing the overall height of the furniture.
L-Shaped Wooden Foot for Furniture Corners
The defining feature of this foot is its L-shaped corner profile.
Rather than using a conventional round or square block beneath the furniture, the foot is designed to sit around the corner of the frame.
This makes it suitable for:
- Sofas and settees
- Armchairs
- Upholstered chairs
- Cabinets
- Storage furniture
- Occasional furniture
- Furniture refurbishment
- Replacement furniture feet
- New furniture manufacture
For the wider selection of timber furniture supports, browse Wooden Furniture Feet & Legs.
Low-Profile 38mm Furniture Foot
At 38mm high, this wooden corner foot provides a much lower profile than many conventional sofa legs and furniture feet.
A low furniture foot can be useful where:
- The existing furniture sits close to the floor
- Only modest ground clearance is required
- A broad wooden corner feature is preferred
- The original foot is shallow
- Increasing seat or cabinet height substantially is undesirable
Always compare the new foot height with the existing support before replacing all the feet on a piece of furniture.
Why Choose an L-Shaped Furniture Foot?
An L-shaped wooden foot is particularly useful where the furniture frame itself forms a strong corner.
The shape can help create a more integrated appearance beneath the furniture, particularly on sofas and cabinets where a small centrally positioned foot may look undersized.
Choose an L-shaped corner foot where:
- The foot is intended to sit at the corner of the furniture
- A broad visible wooden support is preferred
- A shallow furniture foot is required
- The frame provides sufficient mounting area
- The style suits the furniture design
For conventional rectangular alternatives, browse Square Wooden Feet.
For rounded furniture styles, browse Round Wooden Feet.
Available Wood Finishes
The Wooden Corner Foot is available in:
- Black
- Mahogany
- Natural
- Oak
- Raw
- Wenge
The finish can be selected to complement the furniture frame, upholstery and other visible timber.
Black
A dark, neutral finish that works particularly well with contemporary furniture and darker upholstery.
Mahogany
A traditional darker wood finish suitable for classic furniture and richer upholstery colours.
Natural
A lighter timber appearance for furniture where a more natural wooden finish is preferred.
Oak
Suitable where an oak-style appearance better complements surrounding furniture or interiors.
Raw
The raw option allows the timber to be stained, painted or otherwise finished specifically for the project.
Wenge
A very dark wood-style finish suitable for contemporary or strongly contrasting furniture designs.
Raw Wooden Corner Foot for Custom Finishing
The Raw version is particularly useful for restoration work or bespoke furniture where an existing finish needs to be matched.
The unfinished European Beech can be prepared and finished using a suitable stain, lacquer, paint or other furniture finish.
Browse Woodcare, Stains & Lacquers for suitable furniture-finishing products.
Before applying a finish:
- Make sure the timber is clean and dry
- Sand where required
- Remove sanding dust
- Test the finish on a discreet area
- Follow the manufacturer’s application instructions
- Allow the finish to dry fully before fitting
Metal Glide Fitted to the Base
The Wooden Corner Foot is supplied with a metal glide fitted to the base.
The glide provides a defined contact point between the foot and the floor.
For wooden or laminate flooring, the metal glide can be removed and replaced with a softer felt surface.
For suitable alternatives, browse Felt & Nail Glides.
The Self-Adhesive Felt Pads can also be considered where a simple felt contact surface is required beneath suitable furniture.
Wooden Corner Foot or Square Wooden Foot?
A square wooden foot and an L-shaped corner foot perform similar support functions but create very different finished appearances.
Choose the Wooden Corner Foot where:
- The support needs to sit directly at the corner
- A wider 165mm × 165mm footprint suits the furniture
- A shallow 38mm profile is required
- The corner shape forms part of the furniture design
For a more conventional block-style support, see the Square Wooden Foot 65mm × 65mm × 70mm.
For a taller square option, browse the complete Square Wooden Feet range.
Wooden Corner Foot or Round Furniture Foot?
Round wooden feet provide a softer, more traditional furniture profile.
The Round Wooden Feet range includes bun feet, turned feet and tapered legs in a selection of heights and shapes.
Choose a round foot where:
- A softer rounded appearance is preferred
- The furniture does not require a corner-shaped support
- A taller leg or decorative turned profile is wanted
Choose the Wooden Corner Foot where the broad L-shaped corner design better suits the furniture frame.
Wooden Corner Foot or Queen Anne Leg?
For traditional furniture where the leg itself is intended to become a prominent decorative feature, browse Queen Anne Wooden Feet & Legs.
Queen Anne legs provide considerably more height and a shaped traditional profile.
The Wooden Corner Foot is better suited where:
- A low-profile support is required
- The furniture needs a broad corner foot
- A simpler wooden appearance is preferred
Measuring Before Ordering
Before ordering, check:
- 165mm width
- 165mm depth
- 38mm height
- Available corner mounting area
- Existing furniture height
- Position of the existing feet
- Required finish
- Floor surface
- Number of feet required
For measuring equipment, browse Rulers & Tape Measures.
The full footprint of the foot needs to sit correctly beneath the furniture frame. Measure the available area rather than choosing solely from the visible size of an existing foot.
Replacement Wooden Feet for Sofas & Chairs
The Wooden Corner Foot can be used when repairing or updating furniture where an existing corner foot is damaged, missing or no longer suitable.
Before replacing the existing feet:
- Support the furniture safely
- Remove one existing foot where possible
- Compare its dimensions with the replacement
- Check the mounting area
- Inspect the frame for damage
- Confirm the replacement height
- Replace feet consistently so the furniture remains level
For other replacement styles, browse the full Wooden Furniture Feet & Legs range.
Wooden Corner Feet for Trade & Furniture Repair
The Wooden Corner Foot is suitable for professional upholsterers, furniture manufacturers, repair workshops, cabinet makers and domestic furniture projects requiring a broad low-profile timber support.
For similar furniture components, browse Feet, Castors & Glides.
For a more contemporary alternative, browse Metal Furniture Feet.
Existing trade customers should log in to their Livedale account to view preferential pricing.
New professional customers can register for a Livedale Trade Account to access trade pricing.
