Description
Turned Shaped Bun Foot 120mm Diameter × 90mm Tall
The Turned Shaped Bun Foot 120mm Diameter × 90mm Tall is a broad European Beech hardwood furniture foot for sofas, armchairs, footstools, cabinets and other furniture where a decorative rounded support is required.
With a 120mm diameter and 90mm height, it provides a substantial visual base while keeping the furniture relatively close to the floor.
The turned profile adds more detail than a plain bun foot and works particularly well where the wooden foot remains clearly visible beneath the furniture frame.
An M8 threaded fitting allows the foot to screw into a compatible threaded furniture fixing.
Available in Black, Mahogany, Natural, Oak, Raw and Wenge, it can be selected to complement a wide range of furniture finishes and upholstery styles.
For alternative bun feet, turned feet and tapered legs, browse Round Wooden Feet.
Turned Shaped Bun Foot Specification
- Diameter: 120mm
- Height: 90mm
- Timber: European Beech hardwood
- Style: turned shaped wooden bun foot
- Fixing: M8 threaded fitting
- Available finishes: Black, Mahogany, Natural, Oak, Raw and Wenge
- Base: fitted with metal glide
- Suitable for: sofas, armchairs, footstools, cabinets and other furniture
The combination of a 120mm diameter and 90mm height gives this foot a broad, low-to-medium profile suited to substantial upholstered and cabinet furniture.
Decorative Bun Foot for Sofas & Armchairs
The turned shape makes this foot particularly suitable where the furniture support forms part of the finished appearance.
Typical applications include:
- Sofas and settees
- Armchairs
- Upholstered chairs
- Footstools
- Benches
- Cabinets
- Storage furniture
- Occasional furniture
- Furniture restoration
- Replacement furniture feet
- New furniture manufacture
For the wider selection of timber supports, browse Wooden Furniture Feet & Legs.
90mm High Wooden Furniture Foot
At 90mm tall, this foot provides more clearance than the lowest bun feet while remaining considerably shorter than tall tapered or shaped furniture legs.
It is useful where:
- A broad rounded furniture foot is preferred
- The furniture should remain relatively low
- A decorative profile is required
- A tall leg would look out of proportion
- A substantial visible timber support suits the design
Always compare the 90mm height with the existing furniture foot before ordering a replacement.
120mm × 90mm or 110mm × 130mm?
For a taller and slightly narrower alternative, see the Turned Shaped Bun Foot 110mm Diameter × 130mm Tall.
Choose the 120mm × 90mm version where:
- A broader furniture foot is preferred
- A lower overall profile is required
- A substantial bun-style appearance suits the furniture
- Less floor clearance is needed
Choose the 110mm × 130mm version where:
- More height is required
- A slightly narrower profile better suits the furniture
- The foot needs to remain more prominent beneath the frame
- Additional floor clearance is preferred
Turned Shaped Bun Foot or 125mm Shaped Bun Foot?
For an even broader and slightly lower alternative, consider the Shaped Wooden Bun Foot 125mm Diameter × 80mm.
Choose the 120mm × 90mm Turned Shaped Bun Foot where:
- A turned decorative profile is preferred
- A 90mm height suits the furniture
- A substantial but balanced rounded support is required
Choose the 125mm × 80mm Shaped Bun Foot where:
- A wider 125mm diameter is preferred
- A lower furniture profile is required
- A simpler shaped bun appearance better suits the design
Turned Bun Foot or Turned Wooden Foot?
For a narrower decorative alternative, consider the Turned Wooden Foot 100mm Diameter × 102mm.
For slightly more height, see the Turned Wooden Foot 90mm Diameter × 125mm.
Choose the Turned Shaped Bun Foot 120mm × 90mm where:
- A broader wooden support is preferred
- A bun-style appearance suits the furniture
- A lower 90mm profile is required
Choose one of the narrower turned feet where a taller or more compact turned profile better suits the piece.
M8 Threaded Furniture Foot
The foot is supplied with an M8 threaded fitting for attachment to a compatible furniture frame.
Where the furniture already has an M8 threaded insert, the foot can screw directly into place.
Before ordering, check:
- Existing thread size
- Condition of the threaded fixing
- Available mounting area
- Furniture-frame construction
- Required finished furniture height
- Number of feet required
Do not force an M8 thread into an incompatible fixing.
Where a new threaded fixing is required in a suitable timber frame, M8 T Nuts or M8 D Nuts provide compatible M8 fixing options.
Replacing Existing Furniture Feet
The Turned Shaped Bun Foot can be used where existing furniture feet are damaged, missing or being replaced during refurbishment.
Before fitting replacements:
- Support the furniture safely.
- Remove one existing foot where possible.
- Measure its diameter and height.
- Check the existing thread size.
- Inspect the furniture-frame fixing.
- Compare the replacement dimensions.
- Confirm the required finish.
- Check that the furniture sits level after fitting.
Pay particular attention to the 120mm diameter, as sufficient clear space is required beneath the furniture frame.
If you’re unsure whether the foot is suitable, contact Livedale before ordering.
Choosing the Correct Finish
The Turned Shaped Bun Foot is available in six finish options.
Black
The Black finish provides a clean dark appearance suited to contemporary furniture and darker upholstery.
Mahogany
The Mahogany finish provides a traditional darker wood appearance suited to classic sofas, armchairs and richer timber schemes.
Natural
The Natural finish provides a lighter wooden appearance where the European Beech is intended to remain clearly visible.
Oak
The Oak finish complements lighter wooden furniture and interiors using oak-style tones.
Raw
The Raw option is supplied unfinished, allowing the European Beech to be stained, painted or otherwise finished specifically for the furniture project.
Wenge
The Wenge finish provides a very dark wood-style appearance suited to contemporary furniture and stronger contrasts with lighter upholstery.
Raw European Beech for Bespoke Finishing
The Raw option is particularly useful for restoration and bespoke furniture where the visible timber needs to match an existing finish.
Depending on the required appearance, the timber can be:
- Stained
- Painted
- Sealed
- Lacquered
- Polished
Browse Woodcare, Stains & Lacquers for suitable furniture-finishing products.
Before applying a finish:
- Make sure the timber is clean and dry
- Sand where required
- Remove sanding dust
- Test the chosen finish on a discreet area
- Follow the manufacturer’s instructions
- Allow the finish to dry completely before fitting
Metal Glide Fitted to the Base
The foot is supplied with a metal glide fitted to the base.
Where furniture will sit on wooden or laminate flooring, the metal glide can be removed and replaced with suitable felt protection.
Self-Adhesive Felt Pads can provide a softer floor-contact surface where correctly fitted.
Check floor protectors periodically and replace them when worn.
Bun Foot or Tapered Wooden Leg?
For furniture requiring greater height and a slimmer appearance, consider the Round Tapered Wooden Leg 40mm Diameter × 150mm Tall or Round Tapered Wooden Leg 45mm Diameter × 200mm Tall.
Choose the Turned Shaped Bun Foot where:
- A broad rounded support is preferred
- Furniture needs to remain relatively low
- A more traditional or decorative appearance suits the piece
Choose a tapered leg where:
- Greater floor clearance is required
- A slimmer profile is preferred
- A lighter raised appearance suits the furniture
Protecting the Furniture Base
The Plastic 50mm Serrated Washer can be used with suitable M8 furniture-leg installations.
It can help separate the wooden foot from the underside covering and reduce movement where compatible with the furniture construction.
Always make sure sufficient M8 thread remains securely engaged after fitting any washer or additional component.
Check Before Ordering
Before ordering, check:
- 120mm diameter
- 90mm height
- M8 threaded fitting
- Existing furniture-foot dimensions
- Available mounting area
- Required finished furniture height
- Furniture-frame construction
- Condition of the existing fixing
- Number of feet required
- Required finish
- Floor surface
Where replacing an existing foot, remove and measure one original wherever possible.
If you’re uncertain about compatibility, contact Livedale before placing your order.
Turned Shaped Bun Feet for Trade & Furniture Repair
The Turned Shaped Bun Foot 120mm Diameter × 90mm Tall is suitable for professional upholsterers, furniture manufacturers, repair workshops, cabinet makers and domestic projects requiring a broad decorative European Beech furniture foot.
For alternative turned feet, bun feet and tapered legs, browse Round Wooden Feet.
For the wider selection of timber furniture supports, browse Wooden Furniture Feet & Legs.
For compatible threaded furniture fixings, browse T Nuts, D Nuts & Fixings.
Existing trade customers should log in to their Livedale account to view preferential pricing.
New professional customers can register for a Livedale Trade Account to access trade pricing.
