Description
Chrome Corner Metal Furniture Leg 120mm x 120mm
The Chrome Corner Metal Furniture Leg 120mm × 120mm is a polished metal furniture support designed to fit around the corner of sofas, chairs, cabinets, footstools and other furniture.
Available in 130mm, 150mm and 170mm heights, the same corner-leg style can be selected to provide the amount of floor clearance and finished furniture height required.
The polished chrome finish gives the leg a clean contemporary appearance, making it particularly suitable for modern upholstered furniture, cabinets and refurbishment projects.
Choose from:
- 130mm high
- 150mm high
- 170mm high
For other contemporary furniture supports, browse Metal Furniture Feet & Legs.
Chrome Corner Metal Leg Specification
- Corner dimensions: 120mm × 120mm
- Available heights: 130mm, 150mm and 170mm
- Material: metal
- Finish: polished chrome
- Style: corner-mounted furniture leg
- Fixing: pre-drilled fixing points
- Suitable for: sofas, armchairs, chairs, footstools, cabinets, sideboards and furniture refurbishment
- Quantity: supplied individually
The common 120mm × 120mm corner size allows the leg height to be selected without changing the overall style of the fitting.
Choose Your Leg Height
130mm Chrome Corner Metal Leg
The 130mm height is the lowest of the three options.
Choose 130mm where:
- A relatively low furniture profile is required
- Moderate floor clearance is sufficient
- Existing furniture uses a similar height
- A substantial corner fitting is required without raising the furniture too far
This size works particularly well for sofas, armchairs, footstools and lower cabinets.
150mm Chrome Corner Metal Leg
The 150mm height provides the middle option.
Choose 150mm where:
- Additional floor clearance is required
- 130mm is slightly too low
- 170mm would raise the furniture too far
- A balanced mid-height corner leg is preferred
It is a versatile choice for upholstered furniture, cabinets, benches and furniture refurbishment.
170mm Chrome Corner Metal Leg
The 170mm height is the tallest option.
Choose 170mm where:
- Greater floor clearance is required
- A noticeably raised furniture appearance is preferred
- Taller replacement legs are needed
- Additional access beneath the furniture is useful
Before changing from shorter furniture legs, check how the extra height will affect the finished piece.
130mm, 150mm or 170mm?
Choosing the correct height depends on the furniture and the required finished position.
Choose 130mm for the lowest of the three options.
Choose 150mm for a useful middle height.
Choose 170mm where maximum ground clearance within this range is required.
When replacing existing furniture legs, measuring an original leg before ordering is preferable to estimating.
Corner Metal Legs for Sofas & Chairs
The corner-fitting design is particularly useful where the furniture support is positioned directly beneath an outer corner of the frame.
Typical applications include:
- Sofas and settees
- Armchairs
- Occasional chairs
- Footstools
- Ottomans
- Benches
- Cabinets
- Sideboards
- Storage furniture
- Furniture restoration
- Furniture refurbishment
- Bespoke furniture manufacture
For alternative styles and dimensions, browse Metal Furniture Feet & Legs.
Polished Chrome Finish
The polished chrome surface gives the leg a bright modern appearance and works particularly well with contemporary furniture.
Chrome can complement:
- Grey upholstery
- Black furniture
- Neutral fabrics
- Leather furniture
- Chrome handles and fittings
- Modern interior schemes
The corner profile also creates a more substantial appearance than a narrow cylindrical furniture leg.
Corner-Mounted Design
Unlike a conventional round leg positioned beneath a single fixing point, this style is designed to sit around the corner of the furniture frame.
The fixing points allow the leg to be secured to a suitable solid section of the furniture structure.
Before fitting:
- Position the leg against the furniture corner.
- Check that both sides sit correctly against the frame.
- Mark the fixing positions.
- Drill pilot holes where appropriate.
- Use suitable fixings for the furniture construction.
- Tighten the fixings evenly.
- Check that the completed furniture sits securely and level.
Always secure furniture legs into a suitably strong structural section of the frame.
Replacing Existing Corner Furniture Legs
These chrome corner legs are suitable where existing furniture feet are damaged, missing or being replaced as part of a furniture makeover.
Before ordering replacements, check:
- Existing corner dimensions
- Existing leg height
- Fixing positions
- Furniture-frame construction
- Required finished furniture height
- Number of legs required
Where possible, remove one existing leg and compare its measurements with the 120mm × 120mm fitting before ordering.
If you’re uncertain about compatibility, contact Livedale.
Changing Furniture Height
Changing between the three sizes will alter the finished height of the furniture.
Moving from:
- 130mm to 150mm adds approximately 20mm
- 150mm to 170mm adds approximately 20mm
- 130mm to 170mm adds approximately 40mm
This can affect:
- Sofa or chair seat height
- Ease of sitting down and standing up
- Cabinet height
- Floor clearance
- Overall furniture proportions
For straightforward replacement work, matching the original height is normally the safest option.
Corner Leg or Round Chrome Leg?
For furniture requiring a straight cylindrical support rather than a corner fitting, consider the Chrome Round Metal Furniture Legs in the Metal Furniture Feet & Legs range.
Choose the Chrome Corner Metal Leg where:
- The leg needs to fit around the corner of the frame
- A broader corner fitting is preferred
- A substantial visible furniture support is required
- 130mm, 150mm or 170mm height suits the furniture
Choose a round leg where:
- A straight cylindrical profile is preferred
- The leg is mounted beneath rather than around the corner
- A lighter visual appearance suits the furniture
Check Before Ordering
Before ordering, check:
- 120mm × 120mm corner dimensions
- Required 130mm, 150mm or 170mm height
- Fixing positions
- Furniture-frame construction
- Required finished furniture height
- Number of legs required
- Floor surface
Where replacing an existing leg, remove and measure one original wherever possible.
If you’re unsure which size is suitable, contact Livedale before ordering.
Chrome Corner Metal Legs for Trade & Furniture Repair
The Chrome Corner Metal Furniture Leg 120mm × 120mm is suitable for upholsterers, furniture manufacturers, repair workshops, cabinet makers, interior fit-out companies and domestic furniture refurbishment.
For alternative metal legs and furniture feet, browse Metal Furniture Feet & Legs.
Existing trade customers should log in to their Livedale account to view preferential pricing.
New professional customers can register for a Livedale Trade Account to access trade pricing.
